Skip to main content

    Independent information and referral site. Not a utility, contractor or government agency. How we make money

    San Bernardino County · Reported cost

    Solar Panel Cost in Victorville, CA (2026): $4.47/W Reported

    By Updated 8 sources citedVictorville, San Bernardino County

    MethodologyHow we make moneyEditorial policy

    Victorville homeowners who bought their own solar systems reported a median of $4.47 per watt between January 2025 and May 2026, across 150 systems. The middle half paid $3.83 to $4.72 per watt.

    A 6.64 kW system, the median size connected in Victorville in 2025, comes to about $29,700 at that median, or $25,400 to $31,300 across the middle half.

    Those are reported costs, not a quote, and no federal credit comes off a Victorville system finished in 2026: 26 U.S.C. §25D does not cover one whose installation is completed after December 31, 2025 (state and federal rules).

    Median reported cost
    $4.47/W
    Victorville addresses, 150 systems
    Middle half
    $3.83 to $4.72/W
    25th to 75th percentile
    Typical 6.64 kW system
    $29,700
    6.64 kW × $4.47/W, before any incentive
    Same system, middle half
    $25,400 to $31,300
    size: Victorville addresses, 2025 median

    Source: California Distributed Generation Statistics (CPUC), Interconnected Project Sites data set, data through May 31, 2026, checked September 24, 2026. Homeowner-owned, solar-only systems of 1 to 25 kW; leases, PPAs and battery systems are left out (method). The CPUC notes these costs are not verified by the government.

    California Rate Relief is a referral service. We are not a licensed contractor.

    Start with your bill

    Or tap a typical amount

    California Rate Relief is a referral service. We are not a licensed contractor. California Rate Relief is compensated by a solar provider when a homeowner we refer signs an agreement. How we make money

    What a solar permit costs in Victorville

    Victorville's published permit fee for a home rooftop system is $372 (photovoltaic system, residential up to 15 kW).

    That is $78 under the $450 limit that Government Code §66015 sets for a home system up to 15 kW.

    • What Victorville publishes: Victorville's Stand Alone Permits Fee Calculation Chart, updated January 8, 2026, lists a residential photovoltaic system up to 15 kW at $372.00 and a commercial system up to 50 kW at $1,000.00. The City's SolarAPP+ page says SolarAPP+ charges its own processing fee in addition to the City's permit fees.
    • How to file: Yes. Eligible residential rooftop systems go through SolarAPP+, and the City then emails a Victorville permit number for scheduling inspections. Inspections can be booked in the City's Citizen Self Service portal until midnight before the requested day, or by phone with a live person by the business day before; the City does not take inspection requests by voicemail or email.
    • Automated permit platform: SolarAPP+

    Sources: City of Victorville, SolarApp+ Automated Solar Plan Reviews, checked September 23, 2026; City of Victorville, Stand Alone Permits Fee Calculation Chart (updated January 8, 2026): Photovoltaic System (Residential up to 15kw), checked September 23, 2026; Gov. Code §66015, checked September 24, 2026. Victorville in the California Solar Cost Index sets this fee beside every other city's.

    Solar in Victorville: installs, leases and batteries

    Home solar systems connected at Victorville addresses: 1,359 in 2021, 2,551 in 2022, 2,173 in 2023, 1,404 in 2024 and 885 in 2025. So connections peaked in 2022 and 2025 ran 65% below that peak. Another 304 were connected from January to May 2026.

    Of the 885 systems connected in Victorville in 2025, 66% were leased or on a PPA, so a solar company owns them, and 34% belonged to the homeowner. 83% had a battery, more often than the 55% statewide. The median Victorville system was 6.64 kW, and 95 companies connected at least one.

    Victorville beside San Bernardino County and Statewide, 2025
    VictorvilleSan Bernardino CountyStatewide
    Systems connected in 202588511,160145,404
    Leased or on a PPA66%58%45%
    With a battery83%75%55%
    Median system size6.64 kW6.3 kW6.15 kW
    Median reported cost$4.47/W (150)$4.03/W (2,495)$4.14/W (58,628)
    Companies connecting systems953892,475

    Source: CPUC DG Stats, data through May 31, 2026. Counts are home systems given permission to operate each year; a city means the service city on the application.

    Your utility: SCE or Victorville Municipal Utilities Services

    The California Energy Commission's service-territory map places Victorville in Southern California Edison's territory and also shows about 6 percent of the city's area, in its northern part, in the territory of Victorville Municipal Utilities Services. Read the utility name on your bill before using an SCE rate. SCE's average residential rate is 34.4¢/kWh (June 1, 2026; rate tracker).

    Sources: California Energy Commission, Electric Load Serving Entities (IOU & POU) service-territory map. Checked September 23, 2026.

    Before you compare proposals

    The Victorville project checks that change the decision

    Victorville's published permit fee for a home solar system is $372, below the state limit. Most of the city is SCE, but a smaller area in the north falls in Victorville Municipal Utilities Services' territory on the CEC map, so check the bill first.

    Ask the same three questions

    1. Which utility is on your bill: SCE, or Victorville Municipal Utilities Services?
    2. Does the permit line match the City's $372 for a residential system up to 15 kW, plus the SolarAPP+ processing fee?
    3. Is the savings estimate built on SCE's rates without a community choice line? Apple Valley Choice Energy serves Apple Valley, not Victorville.

    Local checks

    $372 up to 15 kW

    The Stand Alone Permits Fee Calculation Chart, updated January 8, 2026, lists a residential photovoltaic system up to 15 kW at $372.00. SolarAPP+ adds its own processing fee.

    Two utilities on the map

    The CEC service-territory map places Victorville in SCE's territory and also shows about 6 percent of the city's area, in its north, in Victorville Municipal Utilities Services' territory.

    No CCA in Victorville

    SCE's list names Apple Valley Choice Energy as serving the city of Apple Valley only, and no community choice provider for Victorville, so SCE supplies generation and delivery.

    Book inspections, do not email

    The City emails a permit number after SolarAPP+ approval. Inspections are booked in Citizen Self Service or by phone with a live person; voicemail and email requests are not accepted.

    Local sources and limits

    Before you sign

    In Victorville the middle half of reported costs spans $3.83 to $4.72 per watt, and roof, panel work, equipment and contract terms explain most of that gap. California Solar Tax and Permit Rules for 2026 covers them, and the tax, lease and disclosure rules a Victorville contract follows.

    Frequently asked questions

    How much does solar cost in Victorville?

    About $29,700 for a 6.64 kW system, at the $4.47 per watt median that Victorville owners reported (150 systems, January 2025 to May 2026; middle half $3.83 to $4.72). Source: CPUC DG Stats. No federal credit applies to a Victorville system finished in 2026.

    What does a solar permit cost in Victorville?

    $372 for a home rooftop system on Victorville's published schedule (checked September 23, 2026); the state limit is $450 up to 15 kW under Gov. Code §66015.

    Which utility serves Victorville?

    The California Energy Commission's service-territory map places Victorville in Southern California Edison's territory and also shows about 6 percent of the city's area, in its northern part, in the territory of Victorville Municipal Utilities Services. Read the utility name on your bill before using an SCE rate. Where SCE serves the address, its average residential rate is 34.4¢/kWh, as of June 1, 2026.

    Sources

    The tax, contract and permit rules every California city shares, with their statutes: California Solar Tax and Permit Rules for 2026.

    Have your bill reviewed

    Start with the utility on your bill and what you pay in a typical month. Contact details come after that. The calculators and checklists on this page stay usable without submitting anything.

    Step 1 of 2 — your bill

    No contact details on this step. Nothing is sent until you submit the second step.

    Submitting does not guarantee a quote, savings, program funding or eligibility.

    California Rate Relief is a referral service. We are not a licensed contractor. California Rate Relief is compensated by a solar provider when a homeowner we refer signs an agreement. How we make money

    Before you send anything

    What this is
    California Rate Relief is a private referral service. It is not a contractor, does not install or finance anything, and is not a utility, a government agency or an assistance program.
    What happens after the form
    Your project details are recorded for referral to a solar provider. The provider decides whether it can help and what it can offer; availability, design and price are determined after its own review.
    How you are contacted
    Read the consent wording before submitting. Your inquiry includes contact details for follow-up about the project; a provider decides whether it can serve it.
    Using the site without submitting
    The calculators, bill comparisons and checklists on this site work without contact details, and nothing on this page requires a submission.